Tempered glass packaging and transportation

The product should be packaged in containers or wooden crates. Each piece of glass should be wrapped in a plastic bag or paper, and the space between the glass and the crate should be filled with a lightweight, soft material that will not cause scratches or other cosmetic defects. Specific requirements should comply with relevant national standards.

 

Packaging Marking

Packaging markings should comply with relevant national standards. Each crate should be marked with the following information: "Upside Down," "Handle with Care," "Break with Handle," "Glass Thickness," "Grade," and "Manufacturer's Name or Trademark."

 

Transportation

The types of transport vehicles and handling procedures used for the product should comply with relevant national regulations.

During transportation, wooden crates must not be laid flat or at an angle. Their length should be aligned with the direction of travel of the transport vehicle, and rain protection measures should be in place.

 

Storage

The product should be stored vertically in a dry indoor environment.